Lamons Launches
IsoTekā„¢ Isolation Gaskets & Kits

As part of Lamons continued commitment to innovation and product line expansion, we are proud to introduce our new line of flange isolation solutions. Designed to address cathodic protection in a variety of midstream and pipeline applications, the Lamons IsoTekā„¢ product line will be another solution that allows Lamons to be the most complete provider of flange sealing solutions. This addition represents our commitment technology and innovation.

Designed around the most premium isolation materials, the Lamons IsoTekā„¢ product line consists of a variety of designs that allow the user to choose a solution appropriate for their application needs.

Lamons IsoMateā„¢

IsoMate
IsoMateā„¢ sealing/isolating gasket consists of a Phenolic retainer faced on both sides with Nitrile rubber material. This gasket is an economical solution for basic performance.
The IsoMateā„¢ sealing/isolating gasket is designed for basic applications where electrical flange isolation and corrosion control are required on pipes containing water/wastewater, gas, natural gas, oil and other hy- drocarbon based medias up to 175Ā°F (79Ā°C). Available for flat face and raised face joint flanges from 1ā„2" to 24", ANSI 150-300#.

Lamons IsoGuardā„¢

IsoGuard
The IsoGuardā„¢ sealing/isolating gasket system is designed for general applications where electrical flange isolation and corrosion control are required on pipes containing gas, natural gas, oil, water/wastewater, and other hydrocarbon based medias up to 300Ā°F (150Ā°C). Available for flat face, raised face and ring type joint flanges from 1ā„2" to 42", ANSI 150-1500# and API 2-5K.
The IsoGuardā„¢ sealing/isolating gasket system consists of a retainer with an incline-plane seal groove designed to optimize each seal's elastic memory, in combination with a proven rectangular sealing element ("Quad" ring). This design guarantees low bolt load requirements and sealing reliability.

Lamons Defenderā„¢

The Defenderā„¢ sealing and isolating gasket is designed for critical applications. Manufactured with a 316 stainless steel core retainer and laminated on both sides with high strength G10 laminate, the Defenderā„¢ gasket is resistant to deforming under load and is used when electrical isolation and corrosion control are required on pipes containing gas, nat- ural gas, oil and other hydrocarbon based medias up to 392Ā°F (200Ā°C). Available for flat face, raised face and ring type joint flanges from 1ā„2" to 32", ANSI 150-2500# and API 2-10K. The Defenderā„¢ gasket is an engineered solution that eliminates costly leaks and provides a solution for fugitive emissions.

IsoTekā„¢ Isolation Kits

For complete isolation, sleeves and washers are needed with an IsoTekTM sealing and isolation gasket. To isolate connecting flanges and protect the gasket and flange from corrosion, Lamons provides sleeve and washer sets to complete the isolation system. The sleeves and washers prevent current from reaching the bolts/studs and nuts.

Sleeve and washer sets are availabe in Single and Double washer sets. The Lamons IsoTekā„¢ product line represents Lamons continued commitment to be the foremost supplier of sealing and fastener technologies. Based on historical requests from our valued customers, Lamons is excited to add these isolation technologies to our current product lineup. Lamons helpful Sales and Engineering staff is always available to assist in evaluating applications and assisting with product selection and proper usage. For further information on Lamons IsoTekā„¢ product line, please contact your local sales representative.