Matrix® CPG
(Corrugated PTFE Gasket)

Matrix CPG® is a superior performance biaxially orientated PTFE gasketMatrix CPG Gasket material with a unique Corrugation Profile. The material has been specially formulated to accept this corrugated effect.

Matrix CPG® is ideal for glass lined, plastic and FRP flanges where high gasket stress are not possible.

Matrix CPG® has been designed to achieve low leakage at minimal load. The high and low density points across the sealing area allow varying loads to be applied radially but achieve a consistently low leak rate. Excellent chemical resistance.
Made in U.S.A.

Gasket Type:
Full Face and Raised Face available. Matrix CPG

Matrix CPG
Complies with the requirements of FDA21 CFR 177.1550.
Test information is available for: HOBT, ROTT, EN 13555.

Operating Limitations
Minimum Temperature: -450oF (-268oC).
Maximum Temperature: 500oF (260oC).
Maximum Pressure: 1235 psi (85 Bar).

Matrix CPG® Size Range:
Thickness: 1/8 in or 3.0mm.
Pressure Class Range: ASME 150 lb thru 300 lb.
Nominal Pipe Size: 1/2 in thru 24 in.
Non-standard sizes available on request.

View PDF File